HC-FL Wind Power Birds Pest Repeller for driving off birds

1)for bird pest repeller 2)60%UV resistance&wear-resistant materials 3)ABS plastic 4)360-degree angle of reflection

 Wind Power Birds Pest Repeller for driving off birds

1. Product Description

The wind bird repeller installed on the cross arm is the first one entering the market of bird repeller. It’s designed for power lines of power system, substation outdoor switch occasion and other bird driving occasion.

2. Principle

Wind bird repeller takes the measures of rotation and reflective type. Its principle is based on wind power as the power supply, takes the center rotating structure with maintenance-free and high quality bearing, and triangular balance bracket made of orange ABS plastic. Above the triangular balance are reflective lenses and three wind bowl with 120 degrees apart and the installation of lens, which make use of the reflection principle to inform an astigmatism area When the wind turbine. Thus those birds will not stay on the high-voltage poles, wires, or build nests under the frightened condition of glare radiation or reflection of their own shadow.

3. Features

(1)Rotated freely by breeze, and reflected light

(2)Support bar made by metal

(3)Rotating shaft installed with maintenance-free and high-speed bearings, and have a good rain performance

(4)Rotating part made of high strength ABS plastic. Rust-proof, Anti-corrosion, No deformation

(5)With 60%UV resistance and wear-resistant materials; weathering resistance ensures the life of the product; High Anti-corrosion; Wearing-resisting

(6)360-degree angle of reflection, no drive off the blind spot

(7) Just the breeze start, every minute rotating fifty circle

4. Technical Parameters

Fan blade diameter: 40cm	Oscillating wind power: ≥0.5 level
Driving away bird Range: ≥dia 3.6m	Temperature: +75°C~-40°C
Seismic intensity: 7	Height:  30cm
Life: over 8 years

Working environment: 35KV~-500KV High voltage transmission and distribution tower, substations, outdoor high-voltage substation equipment

5. Notices during installation

1. When installed, the process must be in strict compliance with the operating requirements of state and local power grid

2. When installed, there must not be someone under the tower, be careful that the installation tools fall and hurt somebody

3. When detachment of the installation tools and product, prevent the loss of installation tools and product.

4. Finish installation, pay attention to the inventory of installation tools and surplus products. And check whether the product is installed securely.

5. Withdrew the product packaging, shall not be abandoned to the scene.

6. Maintenance

The product is made of special materials and fabrication and able to maintain normal efficacy in harsh environments. If the product components don’t loose, routine maintenance is not needed.

Hope our business will benefit for your business

Always here waiting for you

Best wishes

Shirley

HC-FL Wind Power Birds Pest Repeller for driving off birds